Sometimes Xgody GPS devices may display an incorrect location, causing navigation errors or confusion. This problem can occur due to GPS signal issues, outdated maps, software glitches, or incorrect device settings. Understanding the causes and following proper troubleshooting steps can help restore accurate positioning.
This guide explains how to fix wrong location problems on Xgody GPS.
Common Reasons Xgody GPS Shows Wrong Location
Xgody devices may display inaccurate locations for several reasons:
1. Weak or Blocked GPS Signal
Tall buildings, tunnels, dense trees, or bad weather can block satellite signals, leading to incorrect positioning.
2. Outdated Maps or Firmware
Old software or maps may cause the GPS to miscalculate locations.
3. Corrupted System Files
Damaged or incomplete updates can affect the device’s ability to process GPS data.
4. Incorrect Settings
Disabled GPS features, incorrect region settings, or power-saving modes can reduce location accuracy.
5. Hardware Issues
Faulty GPS antennas or internal modules may prevent accurate positioning.
Step-by-Step Solutions to Fix Wrong Location
Step 1: Move to an Open Area
- Take your GPS outdoors or to an open space.
- Avoid tunnels, parking garages, and areas surrounded by tall buildings or dense trees.
- Allow the device a few minutes to acquire satellite signals.
A clear line of sight to the sky improves GPS accuracy.
Step 2: Restart the Device
- Turn off your Xgody GPS.
- Wait 10–15 seconds.
- Turn it back on.
Restarting can clear temporary glitches affecting location accuracy.
Step 3: Check GPS Settings
- Open the device settings menu.
- Ensure GPS or location services are enabled.
- Disable power-saving modes that may reduce satellite reception.
- Check that the region and language settings are correct.
Step 4: Update Maps and Firmware
Outdated software or maps may cause incorrect location readings:
- Connect the GPS to a computer via USB.
- Backup important files, such as saved locations and favorites.
- Download the latest firmware and maps for your Xgody model.
- Install updates using the Xgody GPS Update Tool or SD card method.
Updated software improves satellite detection and positioning accuracy.
Step 5: Clear Corrupted Files
- Connect the GPS to a computer.
- Remove corrupted system or map files.
- Reinstall the maps or firmware using official tools.
- Restart the device to ensure proper function.
Step 6: Perform a Factory Reset
If location errors persist:
- Access the reset option in the settings menu or update tool.
- Select “Factory Reset” or “Restore Default Settings.”
- Allow the GPS to restart.
Warning: Factory reset deletes saved data, including maps and favorites. Backup before proceeding.
Step 7: Check Hardware
- Inspect the GPS antenna and internal connections.
- Ensure the device is not physically damaged.
- If hardware issues are suspected, contact Xgody support for repair or replacement.
Tips to Prevent Wrong Location Issues
- Keep firmware and maps updated.
- Avoid using the GPS in areas with poor satellite reception.
- Restart the device occasionally to refresh the system.
- Backup important files regularly.
- Use high-quality SD cards and power sources.
When to Contact Technical Support
If your Xgody GPS continues to show incorrect locations after troubleshooting:
- Persistent inaccurate positioning despite updates and resets
- Hardware problems, such as a faulty GPS antenna
- System errors that cannot be resolved manually
Xgody customer support can provide repair guidance, replacement options, or advanced troubleshooting.
Final Thoughts
Xgody GPS showing wrong locations is usually caused by weak signals, outdated software, corrupted files, incorrect settings, or hardware issues. By moving to an open area, checking GPS settings, updating maps and firmware, clearing corrupted files, performing a factory reset, and inspecting hardware, you can restore accurate positioning.
Regular maintenance, careful handling, and software updates help ensure your Xgody GPS provides precise navigation for every journey.
Leave a Reply